If you are renovating your home, you know what a long, painstaking process it will be. This is why you want to get it done right, but as fast as possible…so you can pull up those drop cloths for good and enjoy your home!
Painting can be a long, messy task, and that is without the extra coats of paint afterward. Therefore, you will need to know exactly how long different paints take to dry so that you can manage your time and move on to the next task.
If you use Valspar paint to redecorate your interior or exterior, you are in luck. These paints work exceptionally well and cover areas in just a few coats.
But how long does Valspar paint take to dry? That’s what I am here for! Before using Valspar Porch and Floor Paint or Valspar concrete paint, I can tell you everything you need to know.
How long does Valspar Porch and Floor Paint take to dry?
If you want to redecorate and repaint your porch or floor, Valspar Porch and Floor Paint may be perfect. We recommend using Valspar Porch and Floor paint, such as:
It is designed for both inside and outside use and is perfect for porches, concrete floors, patios, or other areas with properly prepared wood. Just remember not to use it on wooden decking!
If you are using this paint, you will need to know how long it takes to dry so you know how long to leave in between coats. With Valspar Porch and Floor Paint, you should leave it to dry for about 6-8 hours before taking any further steps.
You may notice that the paint itself dries to the touch in about 1 hour, but I recommend leaving it for at least 4-6 before deciding if you need a second coat.
Although, at this point, the paint may seem dry and ready to go, we would also advise leaving the first coat for about 24 hours, if possible, before attempting a second coat of paint.
After painting any surface, we recommend you always wait longer to fully ensure that the paint is completely dry and cured before using.
How Long Does it Take for Valspar Concrete Paint to Dry?
If you are using Valspar concrete paint, then the drying times may be a little different. For concrete surfaces, you will need to allow it to dry for at least 24 hours in total before trying to walk on it, as it may ruin the finish.
If you need to drive over the freshly painted concrete surface, leave the paint to dry for at least 72 hours for the best results.
Do Valspar Porch and Floor paint need a Primer?
Regarding Valspar Porch and Floor paint, the formula is made with a high binder content, so you will not need a primer for most of these paints. In addition, many of Valspar’s Porch and Floor paints are considered self-priming, so you will not need to do a priming coat before painting.
That being said, that is a general rule, and if you feel that the surface will need a coat of primer, then we recommend that you do so.
For the best results with Valspar Porch and Floor paint, ensure the surface is clean, dry, and free of any old, peeling, or loose paint before you start.
You will also want to use an all-purpose cleaner to get rid of any dirt, grime, wax, or grease build-up before painting, and any rough, damaged, or recently repaired aspects should be sanded smooth before beginning to paint.
If you are using the paint for new, bare wood, then Valspar recommends that you prime the surface with the Valspar Exterior Latex Primer:
How Do You Apply Valspar Porch and Floor Paint?
If you are ready to do some redecorating for yourself, then you will want to follow the correct instructions to apply the paint perfectly.
Most Valspar Porch and Floor paint is highly versatile and can therefore be used for interiors and exteriors to give your floors long-lasting protection and a fresh appearance.
This paint is highly tough, durable, and weather resistant and has a quick-drying formula for your convenience!
To apply the Valspar Porch and Floor paint with the best results, you must ensure that the floor or surface you are using it on is clean, clear, dry, and has no old, loose, or peeling paint on it.
Then, you should thoroughly cleanse the floor, removing any built-up dirt, grease, debris, grime, or wax with an all-purpose cleaner to ensure a fresh surface for the paint to adhere to.
If the floor you are repainting has any previous glosses or finishes, you may also need to sand it first, ready for the new coat of paint.
Once thoroughly prepping the area, you can start thinking about painting! But first, ensure that the paint is mixed well before you use it!
Make sure you use a high-quality brush for smaller painted surfaces such as stairs or tricky areas, and use a nap roller for larger surfaces for the best results.
After painting your first coat on the chosen surface, leave it to dry for about 24 hours.
If a second coat is needed, then only apply after the advised time has passed, and do so with long, even strokes in the same direction for the perfect finish.
Once you are done painting, we recommend not using the surface for 72 hours to leave it dry completely and thoroughly before using it, and you are done!
